Fujifilm FinePix HS10 Manuel du propriétaire Page 133

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 151
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 132
117
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
The camera does
not turn on.
The batteries are exhausted. Insert fresh or fully-charged spare batteries. 8
The batteries are not in the correct orientation. Re-insert the batteries in the correct orientation. 8
The battery-chamber cover is not latched. Latch the battery-chamber cover. 9
The AC power adapter and DC coupler are not
connected properly.
Make sure that the AC power adapter and DC coupler
are properly connected.
The batteries and the AC power adapter have
been disconnected for some time.
After inserting batteries or connecting the AC power
adapter, wait a few seconds before turning the camera
on.
The batteries run
down quickly.
The batteries are cold.
Warm the batteries by placing them in a pocket or other
warm place and re-insert them in the camera immedi-
ately before taking a picture.
vi
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The camera is in
M mode. Select another shooting mode. 21
The batteries are new, have been left unused
for an extended period, or have been recharged
without  rst being fully discharged (recharge-
able Ni-MH batteries only).
Discharge Ni-MH batteries using the
P DISCHARGE
option and recharge them in a battery charger (sold
separately). If the batteries do not hold a charge after re-
peated discharging and recharging, they have reached
the end of their service life and must be replaced.
113
E HIGH-SPEED SHOOTING is on.
Turn E HIGH-SPEED SHOOTING o to reduce the
drain on the battery.
91
J is selected for focus mode.
Select a di erent focus mode. 51
The camera turns
o suddenly.
The batteries are exhausted. Insert fresh or fully-charged spare batteries. 8
The AC adapter or DC coupler has been discon-
nected.
Make sure that the AC adapter and DC coupler are prop-
erly connected.
Troubleshooting
Vue de la page 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 150 151

Commentaires sur ces manuels

Pas de commentaire