Fujifilm FinePix Z2 Manuel d'utilisateur télécharger pdf (Page 54)

i Refer to the user manual for the printer being

used and check whether the printer supports the

JFIF-JPEG or Exif-JPEG image format. If not,

the printer cannot print the images.

i Movie images cannot be printed.

i Was the image data photographed using

FinePix Z2?

You may not be able to print some images

photographed on other cameras.

CANNOT BE PRINTED

Displayed for PictBridge.

107

Troubleshooting Possible causes Solutions

Troubleshooting eIf you think the camera is faulty, check the following once more.

The indicator lamp does

not light when charging

the battery.

The indicator lamp

blinks during charging

and the battery won’t

charge.

No power.

Power cuts out during

operation.

Battery runs out quickly.

No photograph is taken

when pressing the

shutter button.

Cannot use the flash.

The flash settings are

restricted and cannot be

selected.

The playback image is

dark even though the

flash was used.

The image is blurred.

There is speckling on

the image.

i There is no battery in the camera.

i The battery is loaded backward.

i The camera, AC power adapter and cradle

are not connected correctly.

i The battery terminals are dirty.

i The battery can no longer be recharged.

i The battery has run out.

i The AC power adapter plug has come out

of the power outlet.

i The battery is loaded backward.

i The battery cover is not closed correctly.

i The camera has been left for a long period

with batteries and AC power adapter

removed.

The battery has run out.

i Camera is used in extremely cold

conditions.

i The terminals are soiled.

i The battery can no longer be recharged.

i No xD-Picture Card is inserted.

i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto power off function has turned the

camera off.

i The battery has run out.

i The shutter button was pressed while the

flash was charging.

i Photography mode is set to “

” or “

”.

Continuous shooting is selected.

The Photography mode is set to “AUTO”,

“

”, “

” or “

”.

i The subject is too far away.

i Your finger was covering the flash.

i The lens gets fingerprints etc. and is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow shutter

speed (long exposure) in a high-temperature

environment.

i Load the battery.

i Load the battery in the correct direction.

i Connect the camera, AC power adapter

and cradle correctly.

i Take the battery out briefly and then

reload it.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new or fully charged battery. If the

battery still fails to charge, contact your

FUJIFILM dealer.

i Load a new or fully charged battery.

i Plug the adapter back in.

i Load the battery in the correct direction.

i Close the battery cover correctly.

i Load the batteries or connect the AC

power adapter, and wait a short time

before turning the camera on.

Load a new or fully charged battery.

i Put the battery in your pocket or another

warm place to heat it and then load it into

the camera just before you take a picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new or fully charged battery.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unnecessary frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.

i Turn the camera on.

i Load a new or fully charged battery.

i Wait until the charging is completed before

pressing the shutter button.

i Change the Photography mode.

Set continuous shooting to “OFF”.

The flash settings are restricted because the

camera settings are tailored to the scene

being shot. Change the Photography mode

for a wider range of flash settings.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and does

not indicate a camera fault.

106

Warning Displayed Explanation Remedy

An attempt was made to show 5,000 or

more images by date sorting.

No more than 4,999 images can be shown by

date sorting.

i A protected file was encountered.

i An attempt was made to add a voice

memo to protected file.

i An attempt was made to rotate a

protected file.

i Protected files cannot be erased. Remove the

protection.

i Protected files cannot be added to voice

memos. Remove the protection.

i Protected files cannot be rotated. Remove the

protection.

i The voice memo file is faulty.

i Camera fault.

i The voice memo cannot be played back.

i Contact your FUJIFILM dealer.

An attempt was made to trim a 0.3M

image.

The image cannot be trimmed.

i An attempt was made to trim an image

shot using a camera other than FinePix

Z2.

i The image is damaged.

The image cannot be trimmed.

An attempt was made to specify DPOF

settings for an image that was not

supported by DPOF.

DPOF printing cannot be used with this image

format.

The camera is not connected to a PC or

printer.

i Check that the USB cable (mini-B) is connected

correctly.

i Check that your printer is turned on.

i When using infrared transmission function,

transmit the image data within the printer’s

transmission range.

Displayed for PictBridge.

i Check that the printer is not out of paper or out

of ink.

i Turn the printer off briefly and then turn it back

on.

i Refer to the user manual supplied with your

printer.

Displayed for PictBridge. Check that the printer is not out of paper or out of

ink. Printing automatically restarts when the error

is cleared. If the message still appears after

checking, press the “MENU/OK” button to restart

printing.

Prints were specified for 1000 or more

frames in the DPOF frame settings.

The maximum number of frames for which prints

can be specified on the same xD-Picture Card is

999.

Copy the images for which you want to order

prints onto another xD-Picture Card and then

specify the DPOF settings.

TOO MANY FRAMES

t ERROR

` CAN NOT TRIM

CAN NOT TRIM

DPOF FILE ERROR

CAN NOT SET DPOF

r CAN NOT SET DPOF

COMMUNICATION

ERROR

PRINTER ERROR

RESUME?

PROTECTED FRAME

Warning Displays

An attempt was made to rotate an image

or a movie using a camera other than

FinePix Z2.

These images cannot be rotated by image

formats.

CAN NOT ROTATE

r CAN NOT ROTATE

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61

Commentaires sur ces manuels

Pas de commentaire

Fujifilm FinePix Z2 Manuel d'utilisateur Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Fujifilm FinePix Z2